Key; Warnings - DAB e.sybox Instructions Pour L'installation Et L'entretien

KEY

The following symbols have been used in the discussion:
Situation of general danger. Failure to respect the instruc-
tions that follow may cause harm to persons and property.
Situation of electric shock hazard. Failure to respect the
instructions that follow may cause a situation of grave risk for
personal safety.
Notes

WARNINGS

Read this documentation carefully before installation.
Installation and operation must comply with the local safety reg-
ulations in force in the country in which the product is installed.
Everything must be done in a workmanlike manner.
Failure to respect the safety regulations not only causes risk to
personal safety and damage to the equipment, but invalidates
every right to assistance under guarantee.
Skilled personnel
It is advisable that installation be carried out by competent,
skilled personnel in possession of the technical qualifications
required by the specific legislation in force.
The term skilled personnel means persons whose training,
experience and instruction, as well as their knowledge of the
respective standards and requirements for accident prevention
and working conditions, have been approved by the person in
charge of plant safety, authorizing them to perform all the nec-
essary activities, during which they are able to recognize and
avoid all dangers. (Definition for technical personnel IEC 364)
The appliance is not intended to be used by persons (including
children) with reduced physical, sensory or mental capacities,
or who lack experience or knowledge, unless, through the
mediation of a person responsible for their safety, they have
had the benefit of supervision or of instructions on the use of
the appliance. Children must be supervised to ensure that they
do not play with the appliance.
Safety
Use is allowed only if the electric system is in possession of
safety precautions in accordance with the regulations in force in
the country where the product is installed (for Italy CEI 64/2).
Pumped liquids
The machine has been designed and made for pumping water,
free from explosive substances and solid particles or fibres,
with a density of 1000 Kg/m³, a kinematic viscosity of 1mm²/s
and non chemically aggressive liquids.
The power supply cable must never be used to carry or shift the
pump.
Never pull on the cable to detach the plug from the socket.
If the power cable is damaged, it must be replaced by the
manufacturer or by their authorised technical assistance
service, so as to avoid any risk.
Failure to observe the warnings may create situations of risk for persons
or property and will void the product guarantee.
GB
ENGLISH
63