Disposal; Guarantee - DAB e.sybox Instructions Pour L'installation Et L'entretien

1. No water.
2. Pump not primed.
The display Red: on
3. Setpoint not reach-
shows White: on
able with the set
BL Blue: off
RM value
The display Red: on
1. Faulty pressure
shows White: on
sensor.
BP1 Blue: off
1. Excessive absorp-
The display Red: on
tion.
shows White: on
2. Pump blocked.
OC Blue: off
1. Supply voltage
The display Red: on
too low.
shows White: on
2. Excessive drop in
LP Blue: off
voltage on the line.
The display
One or more devices
shows: Red: off
have sensitive param-
Press + to White: on
eters not aligned.
propagate Blue: off
this config

12 - DISPOSAL

1-2. Prime the pump and check
This product or its parts must be disposed of in an environment-friendly
whether there is air in the pipe.
manner and in compliance with the local regulations concerning the envi-
Check whether the suction or any
ronment; use public or private local waste collection systems.
filters are blocked.
3. Set a RM value that allows the
setpoint to be reached.

13 - GUARANTEE

Any use of faulty material or manufacturing defects of the appliance will
be eliminated during the guarantee period contemplated by the law in
force in the country where the product is purchased, by repair or replace-
1. Contact the assistance centre.
ment, as we decide.
The guarantee covers all substantial defects that can be assigned to
manufacturing faults or to the material used if the product has been used
correctly, in accordance with the instructions.
The guarantee is void in the following cases:
1. Fluid too dense. Do not use
the pump for fluids other than
water.
2. Contact the assistance centre.
Excluded from the guarantee:
1. Check the presence of the cor-
rect supply voltage.
2. Check the section of the power
When making a request under guarantee, apply to an authorised techni-
supply cables.
cal assistance service, presenting proof of purchase of the product.
Press the + key on the device
which we are sure has the most
recent and correct configuration of
the parameters.
• attempts to repair the appliance,
• technical alterations to the appliance,
• use of non original spare parts,
• tampering.
• inappropriate use, for example industrial use.
• parts subject to rapid wear.
GB
ENGLISH
111