Furuno FAR-1513 Manuel D'utilisation page 168

USER SET
1 PILOT SETTING (NO , YES)
2 USER 1 LOAD (NO , YES)
3 USER 1 SAVE (NO , YES)
4 USER 2 LOAD (NO , YES)
5 USER 1 SAVE (NO , YES)
TRAIL MENU
1 TRAIL MODE (REL , TRUE)
2 TRAIL GRAD (SINGLE, MULTI )
3 TRAIL COLOR (GRN, BLU , CYA, MAG, WHT, YEL)
4 TRAIL LEVEL (1 , 2, 3, 4)
5 OS TRAIL (OFF , 1, 2)
6 NARROW TRAIL (OFF , 1, 2) (Non-IMO only)
TARGET LIST
1 SORT (CPA , TCPA, BCR, BCT, RANGE, SPEED, NAME)
ANT SELECT
(Details for the antenna currently in use are displayed here)
9 STORE INTER-SW (NO , YES)
CUSTOMIZE ECHO
1 INT REJECT (OFF, 1 , 2, 3)
2 ECHO STRETCH (OFF, 1 , 2, 3)
3 ECHO AVERAGE (OFF, 1 , 2, 3)
4 TARGET ANALYZER (OFF , ON) (Non-IMO only)
5 HATCHING (OFF , ON) (Non-IMO only)
6 NOISE REJECT (OFF , ON)
7 VIDEO CONTRACT TYPE (1, 2 , 3, 4) (A, B , C)
8 PULSE
1 BACK
2 0.125NM (S1 , S2)
3 0.25NM (S1 , S2)
4 0.5NM (S1 , S2)
5 0.75NM (S1 , S2, M1, M2)
6 1NM (S1 , S2, M1, M2)
7 1.5NM (S1 , S2, M1, M2)
8 2NM (S1 , S2, M1, M2)
9 3NM (S1, S2 , M1, M2, M3)
0 NEXT
1 BACK
2 4NM (S2 , M1, M2, M3, L)
3 6NM (S2, M1, M2 , M3, L)
4 8NM (M1, M2 , M3, L)
5 12NM (M1, M2, M3 , L)
6 16NM (M1, M2, M3 , L)
7 24NM (M1, M2, M3, L )
9 CONDITION
1 BACK
2 NEAR STC CURVE (2, 2.5, 3 , 3.5, 4.2)
3 STC ANT HEIGHT (5, 7.5, 10, 15, 20, 25 , 30, 35, 40, 45, over50m)
LOW LEVEL ECHO (0~ 8)
0 NEXT
1 BACK
2 DEFAULT (NO , SAVE, USER, FACTORY)
3 ACE (OFF , ON)
AP-6