Function Test; Warnings - Truma S 2200 Mode D'emploi

Function test

The leak tightness of the gas supply line must be tested
using the pressure drop method after installation. A test
certificate must be issued (e.g. in accordance with DVGW
Work Sheet G 607 in Germany).
Then test all device functions as described in the operating
instructions.
The operating instructions must be handed over to the vehicle
owner.

Warnings

The yellow sticker containing warning information that is en-
closed with the appliance must be affixed by the installer or
vehicle owner in a location in the vehicle where it is clearly
visible to all users (e.g. on the wardrobe door)! Missing stick-
ers can be requested from Truma.
21