Technical Data - Webasto Live 11 Notice D'utilisation

14

Technical data

EN
Description
Rated voltage [V AC]
Rated current [A AC]
Grid frequency [Hz]
Network types
EMC class
Overvoltage category
Protection class
Protective devices
Integrated electricity consumption meter
Fixation type
Cable feed
Power supply conductor cross section
Connector to vehicle
Power supply terminals, connection cable [mm
Charging cable type 2
Output voltage [V AC]
Max. charging power [kW]
Authentication
Display
Network interfaces
Cellular
Other interfaces
20
2
]
Data
230 / 400 (Europe)
16 or 32 (single phase or 3-phase)
50 / 60
TT / TN / IT
Emitted interference: class B (residential, business, commercial areas)
Immunity: industrial areas
III as per EN 60664
I
A residual current circuit breaker and line circuit breaker must be provided on the installa-
tion side. See chapter 6.2 "Criteria for the electrical connection".
MID-compliant, accuracy class B in accordance with EN50470-3 / class 1 in accordance
with IEC62053-21
Wall and base mounting (permanently connected)
Mounted on-wall or in-wall
Cross section of the connection cable (Cu) taking into account the the local requirements:
6 or 10 mm² for 16 A and 10 mm² for 32 A.
IEC 62196-1 and IEC 62196-2
– rigid (min.-max): 2.5 – 10
– flexible (min.-max): 2.5 – 10
– flexible (min.-max.) with wire end ferrule: 2.5 - 10
up to 32 A / 400 V AC as per EN 62196-1 and EN 62196-2 length of 4.5 m / 7 m – integ-
rated cable bracket
230 / 400
11 or 22 (depending on version)
– RFID card reader
MIFARE DESFire EV1
MIFARE Classic (ISO 14443 A/B)
– "Plug & Charge"
(ISO 15118)
8 RGB-LEDS Buzzer
– LAN (RJ45) – 10/100 Base-TX
– WLAN 802.11b/g - 54 Mbit/s
Slot for micro SIM card (form factor 3FF/ micro SIM), integrated 4G modem (LTE)
– Modbus (RS485) – Push-in terminal
5110326B OI II Webasto Live Multilanguage