Register Your New Spa; Home Menu - Jacuzzi J-500 Manuel D'installation Et Utilisation Et Entretien

Register Your New Spa

The Start up menu will time out after approximately 3 seconds
and then change to the display. Display for the control panel
will vary depending on the model.
While the hot tub is turning on, a welcome message is displayed and
the blow-out cycle is then activated to remove any air in the pipes.
It is important that you register your hot tub, so as to validate the war-
ranty.
In order to register you will need to have the spa serial number
(see figure), Then you will need to register online in order to re-
ceive a passcode. The passcode must be entered on the control
panel.
If this option is skipped, you will be able to activate components,
but, after 10 minutes, the components will turn off and the
screen will revert back to the registration screen. This process
will continue until the spa is registered and the passcode is en-
tered.
Note: The spa will still protect itself if an error is detected.
To register your hot tub:
- go to www.jacuzzi.com
- click on Outdoor Hot Tubs
- click on For Owners
- click on Warranty and Manuals
- click on Warranty Registration
- enter the serial number of your hot tub.
To register your spa you need to have your spa serial number.
The best time to retrieve the serial number is when the spa is
being connected.
Once you register your spa at www.Jacuzzi.com, you will be
given a passcode that will need to be entered into the control
panel.
Once you register your spa online, you can then enter the regi-
stration information into the control panel.
Note: If a number is entered wrong you can tap (
ve backward.
Welcome
Rev 1.0
serial nameplate
X
- From the registration screen, tap (
rial number.
- Input the 9-digit serial number.
set
- Tap ( ) to enter the information and proceed to enter the
passcode.
- Now input the 9-digit passcode, that was provided online when
you registered your spa.
set
- Tap ( ) to enter the information.
Enter Spa Serial #
1
4
7

Home Menu

The Home Menu, provides access to spa functions and pro-
gramming. Operation is made easy by the interactive touch-
screen control panel. If there is no activity for 5 minutes, the
LCD display will time-out into a sleep mode. To reactivate the
display, just swipe across the top from one corner to the other.
I
Home Menu Control Buttons
When a feature is on, the button will have a blue highlight around
it.
ON
96
Temperature Control: Allows you to adjust the set
temperature of the spa:
Increase the temperature by tapping
ments.
Decrease the temperature by tapping
crements.
Note: The temperature range for the spa is 18.33 to
40°C (65 to 104°F).
Jet Button: Tap to access the menu to operate the jets
pump.
) to mo-
42
enter #
2 3
X
5 6
8 9
0
set
UV 6:45 PM
) to enter the spa se-
Enter Passcode #
1 2 3
X
4 5 6
7 8 9
0
set
(
) in 1° incre-
( ) in 1° in-