Jacuzzi J-500 Manuel D'installation Et Utilisation Et Entretien page 45

I
Music Menu
Models equipped with the optional Audio System offer an
enhanced spa experience. The BLUEWAVE 2.0 Wireless Audio
System works with most Bluetooth wireless devices. An auxi-
liary device can be connected, via a 3.5 mm plug cable, located
behind the front cabinet panel, if a Bluetooth device is not avai-
lable. These models also include four high fidelity spa enginee-
red speakers for unsurpassed sound quality and long-life, and
an integrated powered subwoofer for a superb acoustical
sound.
Note: If the spa does not have the stereo option, there will
not be a button on the control panel.
To access the Music Menu, tap (
sic Menu, tap the power button to turn the stereo on. Your con-
nected electronic device, Bluetooth or auxiliary, provides the
audio entertainment.
RISK OF ELECTRICAL SHOCK HAZARD EXISTS
AND EQUIPMENT DAMAGE! Never install or
remove electrical devices while hands are wet or
while sitting partially immersed or fully immersed
in spa!
ON UV
96
Power Button: Tap to turn the stereo on and off.
Bluetooth Settings: Tap to use your Bluetooth de-
BT
vice with the stereo.
Auxiliary Settings: Tap to use your auxiliary device
AUX
with the stereo.
Audio Settings: Tap to access the audio submenu.
Forward: Tap to advance forward through tracks.
Rewind: Tap to move back through tracks.
or
Pause/Play: Tap to pause and play tracks.
from side to side to increase and decrease the volume level.
Artist
Track Name
Artist Track: Will display the artist and track
information, if it is available. If the information is not available
this part will be blank. If the information provided is too long,
the maximum number of characters will be display follow by
dots ("... " ).
. Once you enter the Mu-
)
6:45 PM
MUSIC
BT AUX
Artist
Track name
Volume Slider: Slide
Back Button: Tap to go back to the previous menu.
Invert Button: Tap to invert the display image.
Setting Button: Tap to access the programming and
setting menus.
If you experience a connection problem with your Bluetooth
device, make sure that the Bluetooth antenna is secure and lo-
cated at the highest point within the equipment bay.
I
Bluetooth® Pairing Instructions
To pair your Bluetooth® device to the BLUEWAVE™, follow the-
se steps:
Tap the music icon on the control panel screen then touch the
power button located on the top right to turn on the stereo.
From your Bluetooth® device, make sure that the Bluetooth®
setting is ON.
Follow the pairing instructions for your Bluetooth® device and
connect the "BLUEWAVE™" device that appears on your screen.
If asked for a password, enter the password "0000" and then
connect.
If the pairing process is successful, your Bluetooth® device will
show "Connected" right next to "BLUEWAVE™".
Once the connection is established, Bluetooth® "BT" icon on the
screen will be highlighted confirming the connection.
Note: The BT icon cannot be selected manually unless a Blue-
tooth® connection is established with your device.
I
Audio Settings Menu
To enter the Audio Settings Menu, tap
submenu. The Audio Settings menu offers an enhanced audio
experience by providing a custom or preset bass and treble
settings.
MUSIC
BT AUX
Artist
Track name
Level Adjustment Bars: Indicates the adjustment le-
vel by the number of bars filled.
Bass
Bass Adjustment: Slide from side to si-
de to adjust the Bass range from -5 to 5. This feature can be
used to create a custom sound.
45
from the Music
Audio +
Bass
Treble
Rock Pop Classical