Jacuzzi J-500 Manuel D'installation Et Utilisation Et Entretien page 49

Set
Tap to confirm and save your changes.
When the timer expires, a message will appear on the control
panel display. The CLEARRAY UV bulb must be replaced
and the timer must be reset. Tap "reset" and follow the instruc-
tions above to reset the timer. If you tap "snooze" the message
will clear but the error icon (
screen will reappear in 10 days.
Programming the ProClarity/ProClear Filter Timer
A programmable filter timer can be set to remind you when to
clean or replace the filters and skimmer bag.
Water Care
> >
ProClarity
0 days
180
set to
Set
When you enter the "Water Care" Menu, tap (
you reach the "ProClarity" option.
Slide your finger up and down to roll the days scroll wheel to
adjust the number of days from 0 to 180. The adjustments are
made in increments of 10 days.
Note: The days are store in memory if the power is interrup-
ted.
Note: to ensure the appliance works correctly, do not
deactivate this function; program it as specified.
Set
Tap to confirm and save your changes.
When the timer expires, a message will appear on the control
panel display. The filters must be cleaned or replaced. Follow
the instructions above to reset the timer. If you tap "snooze" the
message will clear but the error icon (
reminder screen will reappear in 10 days. Refer to section
"Cleaning the Filter Cartridges" for cleaning instructions.
Programming the ProClarity Depth Filter Timer
A programmable filter timer can be set to remind you when to
replace the ProClarity Depth Filter.
Water Care
> >
ProClarity Depth
0 days
90
set to
Set
When you enter the "Water Care" Menu, tap
reach the "ProClarity Depth" option.
Slide your finger up and down to roll the days scroll wheel to
adjust the number of days from 0 to 90. The adjustments are
made in increments of 10 days.
Note: The days are store in memory if the power is interrup-
ted.
Note: to ensure the appliance works correctly, do not
deactivate this function; program it as specified.
Set
Tap to confirm and save your changes.
When the timer expires, a message will appear on the control
panel display. Follow the previous instructions to reset the ti-
mer. The filter must be replaced. Refer to section "Cleaning the
Filter Cartridges" for filter location. If you tap "snooze" the mes-
will display and the reminder
)
Reminder
It's time to clean or replace your ProClarity
and ProClear filters. Contact your autho-
rized dealer if new filters are needed.
reset snooze
>
or (
) )
will display and the
)
Reminder
It's time to replace your ProClarity Depth
Filter. Contact your authorized dealer for a
new filter.
reset snooze
>
or until you
sage will clear but the error icon (
minder screen will reappear in 10 days.
Programming the Water Change Timer
A programmable "Water Refresh" reminder can be set to re-
mind you when to drain and refill the spa.
Water Care
>
Water refresh
0 days
180
set to
While in the "Water Care" Menu, tap (
reach the "Water Change" option.
Slide your finger up and down to roll the days scroll wheel to
until adjust the number of days from 0 to 180. The adjustments are
made in increments of 30 days.
Note: The days are store in memory if the power is interrup-
ted.
Note: to ensure the appliance works correctly, do not
deactivate this function; program it as specified.
Set
Tap to confirm and save your changes.
When the timer expires, a message will appear on the control
panel display. The water must be drained and replaced with
fresh water. Follow the instructions above to reset the timer. If
you tap "snooze" the message will clear but the error icon will
display and the reminder screen will reappear in 10 days. Refer
to section "Cleaning the Filter Cartridges" for filter location.
Locking the Spa
From the "Settings" menu, tap (
programming options. You can prevent users from changing
certain features of the spa. When a lock feature is active, the
lock icon ( will appear of the status bar. When you enter the
)
"Lock" menu, if one of the three settings is active, it will be hi-
ghlighted orange.
SETTINGS
Lock
Time & Date
Language
Temp Lock:
Temp
Tap to lock.
Use the scroll wheel
code by sliding your finger to change the numbers.
lock
- Press to activate the lock.
The adjust temperature feature is disabled, but the spa will still
perform all scheduled tasks.
- Press to activate the lock.
Spa Lock:
Spa
Tap to lock.
Use the scroll wheel
code by sliding your finger to change the numbers.
49
will display and the re-
)
>
Reminder
Your spa needs to be drained and refilled
with fresh water. Refer to your owner's
manual for draining procedure.
reset
Set
) or (
>
) next to "Lock" to enter the
LOCK
temp spa
>
set lock level
> 0000
>
unlock
0000
to assign a 4-digit lock and unlock
0000
to assign a 4-digit lock and unlock
snooze
>
) until you
service
lock