Jacuzzi J-500 Manuel D'installation Et Utilisation Et Entretien page 50

lock
- Press to activate the lock.
All activation and adjustment features are disabled but the spa
will still perform all scheduled tasks.
- Press to activate the lock.
Service Lock:
Service
Tap to lock.
- Scroll through the figures
code.
lock
- Press to activate the lock.
All spa functions are locked to allow for a temporary service
mode for filter cleaning.
- Press to activate the lock.
When the lock is disabled, the system activates a blow-out cycle
(any air in the pipes is removed).
Deactivating the lock
- From the "Settings" menu, press (
the configuration options (active lock mode is shown).
- Press the first figure on the panel
gure in the code; then the second etc. until the full code has been
entered.
unlock
- Press to deactivate the lock.
- Press to return to the previous menus.
Note: should you lose or forget the original code, you can use
the pre-set access code "0772" to deactivate the lock mode.
Programming the Time and Date
From the "Settings" menu, tap (
enter the programming options.
SETTINGS
>
Lock
>
Time & Date
>
Language
To set the time and date:
Time
Tap to program the time.
Slide your finger up and down to roll the time scroll wheels to
adjust the time. The "am" and "pm" will adjust according as the
time is changed.
Time & Date
Time
Date
6:45p 01/01/2015
1 26 2015
24 Set
Date
Tap to program the date.
Slide your finger up and down to roll the date scroll wheels to
adjust the date. Each setting for month, day and year can be
set independently. The default time setting is a 12-hour confi-
guration. To choose the 24-hour configuration, then tap, (
to change the setting.
Set
Tap to save and accept the changes.
0000
to assign a 4-digit lock/release
>
next to "Lock" to access
)
0000
and enter the first fi-
>
next to "Time & Date" to
)
Time & Date
Time
6:45p 01/01/2015
8 00
pm
24
Programming the Language
From the "Settings" menu, tap (
ter the language options.
SETTINGS
Lock
Time & Date
Language
Indicates that the feature is active.
feature is not active.
There are 4 languages to select from: English, French, Deut-
sch,and Spanish. To view the selections, use the scroll wheel to
move up and down. To select a language, tap (
language you want to display.
LANGUAGE
English
French
Deutsch
Wi-Fi Setup
Connecting to your home Wi-Fi network. From the "Settings"
menu, tap (
tions. Make sure you have downloaded the Wi-Fi App for this
setup.
Date
SETTINGS
Heat & Filter
Water Care
Set
WiFi
You need to follow the instructions from the App in order to
connect the Wi-Fi.
While the system attempts to connect you will see the, "Spa
Wi-Fi Setup in-progress". When the connection is done the di-
splay will read, "Spa Wi-Fi Setup Connection Success".
WiFi Connect
Spa Wi-Fi Setup
Successfully Connected
If the Wi-Fi connection setting should need to be updated or
connected to new router, follow the steps below.
From the "Settings" menu, tap (
menu.
Reset?
Tap . The display will change to "Spa Wi-Fi Setup In-
)
24
progress" and the reset button will be highlighted in orange.
Reset?
Tap
spa to connect to the need data.
Reconfigure and setup your spa by following the instructions
from the app.
50
>
) next to "Language" to en-
>
English
>
French
>
Deutsch
Spanish
>
next to "Wi-Fi" to enter the programming op-
)
>
>
>
reset?
>
) next to "Wi-Fi" to enter the
again. This will clear the current data and allow the
LANGUAGE
Indicates that the
) next to the
LANGUAGE
WiFi Connect
Spa Wi-Fi Setup
In-progress
reset?