Changing Drive Function - Vermeiren LiNX 200 Manuel D'utilisation

Adjust function
Seat inclination
Lift
Leg rest right
Unspecified

4.7 Changing drive function

The wheelchair's speed functions can be operated using the drive select
button. There are three available drive functions.

Press the top of the button to select the next drive function. Press the
bottom of the button to select the previous drive function.
The selected drive function is indicated on the drive function indicator, to the right-hand
side of the drive select button. The indicator has three LED's, one for each available drive
function. When drive function 1 is selected, only the bottom indicator will be lit. For drive
function 3, all LED's will be lit.
The maximum driving speed by maximal deflection of the joystick depends on the selected
drive submenu (1, 2 or 3) and the manual speed setting in this submenu.
Display Adjust function
Backrest inclination
Leg rests simultaneous
/ central footplate
11
Operating console functions
Leg rest left
None
Figure 5
LiNX 200
2019-01
Display
Drive function button
EN
NL