Failures And Blocks; Battery Status And Charging - Vermeiren LiNX 200 Manuel D'utilisation

4.2 Failures and blocks

When the operating console is powered and a failure appears, the ON/OFF
button starts blinking in red. The number of blinks indicates the fault code. In
case of a failure, one or all functions of the operating console are blocked. For
more information, see §5.

4.3 Battery status and charging

WARNING
Follow the charging instructions in the wheelchair instruction manual and the suppliers'
manual of the battery charger.
Battery
charge
indicator
Table 1: Battery charge indicator
Display
Risk of injuries and damage
The battery charge indicator (located above the
on/off button) is used to indicate that your
wheelchair power is on. The indicator provides an
estimate of the remaining battery capacity.
In the following table all battery indications and their
meanings are collected.
Description
All LED's dark.
All LED's are lit and the
green LED's are flashing.
All LED's are lit.
1 Green led is lit.
Meaning
System off.
System on.
High voltage warning:
battery voltage level has
risen above the high voltage
warning set-point.
System on.
System on.
7
LiNX 200
2019-01
Operating console functions
Remarks
Warning: battery too full.
Slow down if you are driving
down a slope.
LED's show the charge
level.: Full battery (between
80 and 100% of full
capacity)
Battery level is decreasing.
EN
NL