MC Crypt DJ-750 Notice D'emploi page 37

Connection and control elements
(37) HEADPHONE socket
Connect your headphones here.
(38) BALANCE control
Use this control to set the volume of the headphones.
(39) EFFECT switch
Use this control to activate or deactivate the EFFECTS SEND/RECEIVE (46) effects loop connection.
When the switch is pressed, the mixer signal is routed though the EFFECTS SEND/RECEIVE (46) effects loop
connection. When the switch is not pressed, the effects loop is bypassed.
(40) Mains connection
Plug in the mains cable here.
(41) Voltage selection switch
Use this switch to set the correct mains voltage.
Setting the wrong voltage can result in irreparable damage to the device and exposes the user
to risks.
(42) OUTPUT R/L sockets
TRS connection for the downstream amplifier.
(43) OUTPUT MASTER sockets
RCA connection for the downstream amplifier.
(44) ZONE sockets
RCA connection for a second amplifier (e.g. in an adjoining room or for monitor loudspeakers).
(45) REC sockets
Connection for a recording device.
37