MC Crypt DJ-750 Notice D'emploi page 33

Connection and control elements
(1) MIC MID control
Mid-range control for the microphone channel.
Turn it clockwise to amplify the mid range. Turn is anti-clockwise to attenuate the mid range.
(2) MIC TREBLE control
Treble control for the microphone channel.
Turn it clockwise to amplify the treble. Turn is anti-clockwise to attenuate the treble.
(3) MICROPHONE1 socket
Connection for a dynamic microphone or a condenser microphone with its own power supply
This socket allows you to connect microphones with TRS plugs or XLR plugs.
(4) KILL switch (TREBLE)
This switch kills the treble from the microphone signal.
When the switch is activated, the respective LED lights up.
(5) KILL switch (MID)
This switch kills the mid-range frequencies from the microphone signal.
When the switch is activated, the respective LED lights up.
(6) Equalizer
The equalizer controls allow you to sensitively control the sound of the output signal.
A narrow frequency band is controlled by each control. There are separate controls for the right and the left channel.
The control range is +/-10 dB.
(7) GAIN control
These controls set the input sensitivity of the mixer channel to the connected audio source.
Turn the control clockwise to increase the signal of the channel.
(8) CUE switch
These switches are used to determine what channels are played on the headphone channel for pre-listening.
33