MC Crypt DJ-750 Notice D'emploi page 34

Connection and control elements
(9) Input selection switches
These switches allow you to select the input (connection) to be played back via the respective mixer channel.
(10) Channel faders
Use these slide controls to set the volume of the respective channel.
(11) Level indicator
Shows the mixer output level.
(12) MASTER MONO/STEREO switch
Use this switch to determine whether to provide a mono signal or a stereo signal on the master channel output.
(13) MASTER BALANCE control
This control sets the volume balance between the left and the right channel of the master output.
(14) MASTER fader
This slide control sets the volume of the master output.
(15) ZONE MONO/STEREO switch
Use this switch to determine whether to provide a mono signal or a stereo signal on the ZONE output.
(16) ZERO BALANCE control
This control sets the volume balance between the left and the right channel of the ZONE output.
(17) ZONE fader
This slide control sets the volume of the ZONE output.
(18) ECHO switch
Use this switch to activate or deactivate the ECHO effect (ON or OFF).
(19) ECHO DELAY control
Use this control to set the delay of the echo effect.
34