Specifications - Stihl HT-KM Notice D'emploi

Definitions
1 Drive Tube
Encloses and protects the drive
shaft between the coupling sleeve
and gearbox.
2 Oil Filler Cap
For closing the oil tank.
3 Oil Tank
Tank for chain lubricating oil.
4 Oilomatic Saw Chain
A loop consisting of cutters, tie
straps and drive links.
5 Guide Bar
Supports and guides the saw chain.
6 Chain Guard (Scabbard)
To protect the operator from
touching the chain.
7 Chain Sprocket Cover
Covers the sprocket.
8 Hook
For pulling branches away.
9 Handle Hose
For holding and controlling the unit
with the hand during operation.
10 Sleeve
Locates drive tube in coupling
sleeve.
11 Chain Tensioner
Permits precise adjustment of chain
tension.
12 Chain Sprocket
The toothed wheel that drives the
saw chain.
HT-KM

Specifications

Chain lubrication
Fully automatic, speed-controlled oil
pump with rotary piston
Oil tank capacity: 220 cm
Weight
without with cutting
attachment: 2.0 kg
Cutting attachment
The actual cutting length may be less
than the specified cutting length.
STIHL cutting attachments acc. to CSA
Standard Z 62.3:
Guide bar Rollo Light 01
Blade length: 25, 30, 35 cm
Pitch: 1/4" P (6.35 mm)
Groove width: 1.1 mm
Saw chain 1/4" P
Picco Micro3 (71PM3) Type 3670
Pitch: 1/4" P (6.35 mm)
Drive link gauge: 1.1 mm
Chain sprocket
8-tooth for 1/4" P
Other Cutting Attachments
Other cutting attachments acc. to CS
Standard Z62.3 are available: see
section CSA-Standard Z62.3,
"Instruction leaflet" in the saw chain
package; or ask your STIHL dealer.
Your STIHL dealer will be happy to help
you properly match your engine with the
3
(0.22 l)
appropriate bar/chain combinations to
reduce the risk of kickback injury.
English
25