Extraordinary Maintenance - Rizzoli RE 40 Manuel D'utilisation

4.10 MAINTENANCE OF THE LIGHT
WARNING! Before starting any maintenance operation for the light, you must disconnect
it from AC power and be sure that the cooker is not powered. Verify also if the cooker is
cold and if the light was turned on in the previous minutes.
Oven lamp suffers high temperatures. Even if it
is designed to work in these conditions, it could
become out of order. You have to replace it with
a lamp with the same features (halogen lamp 25W
230V 300° connection G9). To replace the lamp
you have to unscrew the lamp cover, remove the
Picture 36 - Take-down the oven lamp.
4.11 THERMIC DILATATION
During the use all the materials of the thermal
cooker are subjected to dilatation and light moving
due to the temperature variations. This phenom-
enon must not be prevented otherwise deforma-
4.12 EXTRAORDINARY MAINTENANCE
Most of the cooker's parts are easy to remove with
a simple screwdriver, eventual repairs or modifies
will be faster if the concerned piece, directly or by
a dealer is sent to our factory. If you need acces-
sories or spare parts, please tell us the the serial
lamp, insert the new lamp and finally screw in the
lamp cover. Seldom, it is necessary to clean the
glass of the lamp cover. To make this, you have to
unscrew the lamp cover, remove the external re-
siduals due to the cooking steams, wash the lamp
cover and once it is dry you can screw it in its place.
tions and breakings may occur. For this reason, the
spaces that allow the dilatation both internal and
external of the thermal cooker must be kept free
and clean.
number of the cooker indicated in the green book-
let given together with the wood fired cooker. The
serial number is also indicated on a plate placed on
the side of the wood box.
126