3.12
BAKING-PAN HOLDER
The baking-pan holder allows to extract the bak-
ing-pan in a safe way, with no need to use rags or
Picture 32 - Baking-pan holder.
3.13
WATER BASIN (RE 100 - RVE 100 COOKERS)
On RE 100 – RVE 100 range cookers, it is possible
to request a steel water basin to produce hot wa-
ter for domestic use. The basin is inserted in the
upper part of the cooker, on the plate, in corre-
spondence of the fumes outlet. During the use, be
3.14
FIRE DOOR PROTECTION (OPTIONAL)
For RVE – RVI range wood fired cookers it is pos-
sible to request a steel protection which could be
placed on the fire door. This protection is designed
to shield the door when the cooking operations
require the continuous presence of the user in
front of the cooker or in presence of children. In
the other situations the use of the protection de-
pends on your discretion. The placing operations
must always be done with cold cooker opening the
fire door and placing the protection on the door
by joint.
3.15
PLATE COVER (OPTIONAL)
On every cooker it is possible to use a stainless
steel plate cover, made to cover the plate in the
periods in which the cooker is not used. In this way
you obtain an uniform desktop. The plate cover
hot pads. The baking-pan holder must be hooked
to the baking-pan edge and used with two hands.
sure that the water is always present in the basin,
otherwise it could be damaged. The basin must not
be completely full, leave at least 4 cm between the
water level and the cover.
Picture 33 – Fire door protection.
must be used with cold cooker. Before placing it,
be sure that is not present humidity, that the plate
is clean and that all the necessary maintenance is
done.
122