Contemporary Front Facing Kit Installation - Napoleon GD19-1N Instructions D'installation Et D'opération

8.2

CONTEMPORARY FRONT FACING KIT INSTALLATION

Remove the safety screen and glass door, refer to "SAFETY SCREEN & GLASS DOOR" section.
A.
Install the side brackets, ensure the front face is on a soft surface to avoid any damages during bracket
B.
instalation, see Figure 1.
Install the lower side bracket on the front as shown in Figure 2.
C.
Install the safety screen, spline up, see Figure 3.
D.
Place the front facing onto the appliance and install the rest of the top trim and control panel as shown in
E.
Figure 4.
FIG. 1
FIG. 3
FIG. 2
FIG. 4
41
EN
W415-1351 / 08.29.14