Finishing; Front Surround Removal / Installation; Front Surround Installation For Recessed Installation - Napoleon NEFL50HF-BT Manuel

5.0 fi nishing
EN
WARNING
!
• Power supply service must be completed prior to fi nishing to avoid reconstruction.
• Heat vents and air openings cannot be covered in any circumstances.
5.1

front surround removal / installation

Remove the two screws securing the front surround place (Fig. 5-1).
A.
Lift the front surround up and out from the appliance (Fig. 5-2).
B.
Place the front surround face-down on a soft, non-abrasive surface (Fig. 5-3).
C.
Reverse these steps to install the front surround.
D.
NEFL50HF-BT
Illustrated

5.1.1 front surround installation for recessed installation

Lift the front surround onto the appliance (Fig. 5-4).
A.
Secure the front surround in place by installing two screws from the inside to the outside of the appliance
B.
(Fig. 5-5).
NEFL50HF-BT
Illustrated
16
W415-1987 / D / 03.04.22
Fig. 5-1
NEFL50HF-BT
Illustrated
Fig. 5-4
NEFL50HF-BT
Illustrated
Fig. 5-3
NEFL50HF-BT
Illustrated
Fig. 5-2
Fig. 5-5