Afk82/Rfk82 Facing Kit Installation - Napoleon GD82NT-TE Instructions D'installation Et D'opération

6.5

AFK82/RFK82 FACING KIT INSTALLATION

Attach screw and spacer as illustrated to the top of both sides of the front housing.
A.
Attach the two hooks as illustrated using the screws supplied. (The hooks must be installed on the inside of
B.
the bracket). These hooks will catch the front in the event the latch disengages.
Lift and hook the faceplate over the spacers, starting with the bottom then pivoting the top into place. Push
C.
the top of the faceplate so the male catch engages the female catch.
The tension of the catch is easily adjusted by using a slotted screwdriver on the set screw of the female
D.
catch.
NOTE: A 1/4" gap must be maintained between the front and all fi nishing material due to regular removal.
35
EN
W415-1410 / 11.20.14