Glowing Embers (Optional); Charcoal Lumps/Lava Rock; Optional Front Installation - Napoleon GSS42CFN Instructions D'installation Et D'opération

14
PORT CAVITY
EN
E.
Position the slot in the bottom of the right
log (W135-0670) onto the bracket beside the
burner on the right, with the charred face of
the log to the front.
5.2

GLOWING EMBERS (OPTIONAL)

Glowing embers (not supplied) may be used to enhance the flame's appearance. Tear the embers into pieces
and place along the front row of ports covering all of the burner area in front of the small logs. Care should
be taken to shred the embers into thin, small irregular pieces as only the exposed edges of the fibre hairs will
glow. The ember material will only glow when exposed to direct flame; however, care should be taken
to not block the burner ports.
PINS
Blocked burner ports can cause an incorrect flame pattern, carbon deposits and delayed ignition. PHAZER
logs glow when exposed to direct flame. Use only certified "glowing embers" and PHAZER
from your authorized dealer / distributor.
5.3

CHARCOAL LUMPS/LAVA ROCK

Place lava rock around the base of the appliance,
A.
making sure not to block any burner ports or valve
access. Retain a small amount of lava rock for step C.
Place formed charcoal lumps around the front and
B.
sides of the appliance.
Use remaining lava rock to blend with the charcoal
C.
lumps.
5.4

OPTIONAL FRONT INSTALLATION

When using optional finishing accessories, the framing dimensions and finishing materials may differ from what
is outlined in the "FRAMING" section of this manual; refer to the leaflet instructions supplied in the accessory
kit for specific framing and finishing specifications.
W415-2164 / D / 08.23.18
D
A
C
B
5
IT IS HIGHLY RECOMMENDED TO PROTECT THE LOGS FROM MOISTURE.
COVER THE FIREBOX WHEN NOT IN USE.
PORT CAVITY
PINS
E
F.
Position log F (W135-0481) in front of the
front row of burner ports, and allow it to rest
against the backside of the grate assembly.
IMPORTANT
PINS
D
A
C
B
F
logs available
TM
E
5
TM