Finishing; Front Facing Kit Installation - Napoleon GD19-1N Instructions D'installation Et D'opération

8.0 FINISHING

8.1

FRONT FACING KIT INSTALLATION

THE COMPONENTS IN THIS KIT ARE HEAVY, USE CARE WHEN LIFTING AND ENSURE THEY ARE
THIS FRONT FACING DOES NOT REPLACE THE MAIN GLASS DOOR. DO NOT OPERATE WITHOUT
THE FRONT FACING CAN SIT FLUSH WITH A COUNTER, FLOOR, OR HEARTH.
Remove the safety screen and glass door, refer to "SAFETY SCREEN & GLASS DOOR" section.
A.
Install the side brackets, ensure the front face is on a soft surface to avoid any damages during bracket
B.
instalation, see Figure 1.
Install the safety screen, spline up, see Figure 2.
C.
Install the decorative facing trim as shown in Figure 3.
D.
Place the front facing onto the appliance and install the rest of the top trim and control panel as shown in
E.
Figure 4.
FIG. 1
WARNING
!
FIRMLY SECURED ONCE INSTALLED.
THE MAIN GLASS DOOR INSTALLED.
FIG. 3
W565-0094 W565-0094 W565-0094
W715-0745 W715-0745 W715-0745
FIG. 2
39
EN
W415-1351 / 08.29.14