Logo Placement; Burner Installation; Remote Receiver Placement - Napoleon GD19-1N Instructions D'installation Et D'opération

8.4

LOGO PLACEMENT

Remove the backing of the logo supplied and place on the glass viewing door,
as indicated.
8.5

BURNER INSTALLATION

See separate instructions accompanying the burner assembly (sold separately). Keep those instructions along
with this manual.
8.6

REMOTE RECEIVER PLACEMENT

Position the remote receiver in the valve compartment close to the electrical junction box. Ensure the
receiver is on top of the placement label, if equipped.
FIREPLACE BASE
JUNCTION
BOX
PLACE REMOTE
RECEIVER ON TOP
OF THIS LABEL
43
½"
(12.7mm)
LOGO
½"
(12.7mm)
97.1A
35.25
W415-1351 / 08.29.14
EN