1
General
This operating instructions contains all instructions for installing, starting up, maintaining and
repairing membrane metering pumps of the
NOTE
If you have questions, please contact us as outlined in chapter
Manufacturer".
1.1
EBS Article numbers
Within this operating instruction article numbers, and EBS numbers are represented. EBS
numbers are
1.2
Transport damage
CAUTION
ATTENTION
1.3
Warranty coverage
Operational safety, reliability and performance of this model are only guaranteed by the
manufacturer if the following conditions are met:
- Mounting, connections, adjustment, service and repair are performed by authorized and
trained personnel.
- The membrane metering pump must be used according to the specifications in this
operating instructions contained in the delivery scope.
- Only original spare parts must be used for repairs.
- The warranty claim is invalidated if the pump housing is opened.
In addition, the general warranty and service conditions of the company
Ecolab Engineering GmbH
1.4
Contact address / Manufacturer
Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83309 Siegsdorf, Germany
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 2 35
eMail:
engineering-mailbox@ecolab.com
417101338_EMP_KKS_E10
The German sections of this manual constitute the ORIGINAL OPERATING MANUAL and
take legal precedence.
All other languages are translations of the ORIGINAL OPERATING MANUAL.
Ecolab
internal article numbers and used only "concern internal".
If the Pump is found to have been damaged when it is unpacked, it should not be installed!
are applicable.
®
ELADOS
EMP KKS
26
(Version E10).
1.4
"Contact Address /
Rev: 09-08.12