Throttle Cable Adjustment - Yamaha YZ85 Manuel D'atelier Du Proprietaire

THROTTLE CABLE ADJUSTMENT/

THROTTLE LUBRICATION
5PA30110
5PA30120
5PA30130
5PA30140
3 - 10
EC35A001
THROTTLE CABLE ADJUSTMENT
1. Check:
Throttle grip free play a
G
Out of specification → Adjust.
Throttle grip free play a:
3 ~ 5 mm (0.12 ~ 0.20 in)
2. Adjust:
Throttle grip free play
G
Throttle grip free play adjustment steps:
Loosen the locknut 1.
G
Turn the adjuster 2 until the specified free
G
play is obtained.
Tighten the locknut.
G
NOTE:
Before adjusting the throttle cable free play,
the engine idle speed should be adjusted.
WARNING
After adjusting, turn the handlebar to
right and left and make sure that the
engine idling does not run faster.
THROTTLE LUBRICATION
1. Remove:
Throttle cable cap 1
G
2. Apply:
Lithium soap base grease
G
On the throttle cable end a and tube guide
cable winding portion b.
3. Install:
Throttle cable cap
G
1 Nm (0.1 m · kg, 0.7 ft · lb)
INSP
ADJ