Yamaha YZ85 Manuel D'atelier Du Proprietaire page 278

KICK SHAFT, SHIFT SHAFT AND PRIMARY DRIVE GEAR
6. Install:
Right crankcase cover 1
G
NOTE:
Mesh the impeller shaft gear 2 with primary
drive gear 3.
5PA41200
7. Install:
Bolt (right crankcase cover) 1
G
Copper washer (oil drain bolt) 2
G
Oil drain bolt 3
G
Copper washer (coolant drain bolt)
G
4
Coolant drain bolt 5
G
5PA41210
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
8. Install:
Kickstarter crank 1
G
Washer 2
G
Bolt (kickstarter crank) 3
G
NOTE:
Install the kickstarter crank closest to but not con-
tacting the pillar tube 4 and exhaust pipe 5.
5PA41220
9. Install:
Shift pedal 1
G
Bolt (shift pedal) 2
G
NOTE:
Install the shift pedal with the bottom of the
pedal outer diameter a as close to the center
of the engine mounting bolt 3 as possible.
5PA41230
4 - 40
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)