Error Messages; Specifications; Main Specifications; Analog And Digital Input/Output Specifications - Korg ZERO Manuel D'utilisation

2. Error messages

• MIDI RX BUSY
A large amount of incoming MIDI data is being processed. While this
message is displayed, the faders and knobs will be temporarily inoperable.
Please wait for this message to disappear before you continue operation.
• MIDI RX ERROR
More MIDI data was received in a short time than could be processed suc-
cessfully. Please avoid sending unnecessary MIDI data.
• SYSTEM ERROR ???
This message will appear if the ZERO8 has a problem or malfunction. If
this message appears, make a note of the ??? text, and contact customer
service.

3. Specifications

Display: 160 x 104 pixel, LCD with backlight and touch panel
Power supply: AC Local Voltage
Power consumption: 52W
Dimensions: 450 mm (W) x 371 mm (D) x 125 mm (H) /
17.72" (W) x 14.61" (D) x 4.92" (H)
Weight: 7.3 kg / 16.09 lbs.

Main specifications

INPUT (TRS) ➔ OUTPUT (MASTER)
Frequency response: 10 Hz–20 kHz +1 dB, -2dB @ fs 44.1 kHz
10 Hz–21 kHz ±1 dB @ fs 48 kHz
10 Hz–40 kHz ±1 dB @ fs 96 kHz
15 Hz–50 kHz ±1 dB @ fs 192 kHz
S/N: 93 dB (typical) @IHF-A
THD+N: 0.02% (typical) INPUT: +22 dBu @ GAIN = 0 dB
A/D conversion: 24-bit 64-times oversampling
D/A conversion: 24-bit 128-times oversampling
Sampling frequency (fs): Internal 44.1 kHz, 48 kHz, 96 kHz, 192 kHz

Analog and digital input/output specifications

INPUT 1–8 (LINE, CD/LINE)
Connectors: 1/4" TRS phone jacks (balanced) L/R,
RCA jacks L/R
Input impedance: 10 kΩ
Nominal level: TRS: +4 dBu @ GAIN = 0 dB (GAIN = -∞dB–0dB)
RCA: -10 dBu @ GAIN = 0 dB (GAIN = -∞dB–+6dB)
Maximam level: TRS: +22 dBu @ GAIN = 0 dB (GAIN = -∞dB–0dB)
RCA: +8 dBu @ GAIN = 0 dB (GAIN = -∞dB–+6dB)
600 Ω
Source impedance:
PHONO 1–3
Connectors: RCA jacks L/R
Input impedance: 50 kΩ
Nominal level: -44 dBu @ 1 Khz, GAIN = 0 dB (GAIN = -∞dB–+6dB),
RIAA comliant
33