System Setup; Setup Procedure; Setup Parameter Guide; Selecting The Fader Curve - Korg ZERO Manuel D'utilisation

System setup

Here you can specify the curve setting for each of the ZERO8's faders, and
specify the MIDI messages that will be assigned to the various controllers.

1. Setup procedure

Press the SETUP button to access the SETTING MAIN page. Here you can
make various settings for the ZERO8.
To save the setting parameters
When you modify the setting parameters, the SETUP button will blink.
To save the setting parameters into the ZERO8's internal memory, press the
SETUP button while it is blinking, or move to a page other than SETTING.
If you turn off the power while the SETUP button is blinking, the changes
you had made at that time will not be saved in internal memory.
22

2. Setup parameter guide

Selecting the fader curve

1. CHANNEL FADER
Here you can select or create the fader curve setting for each of the channel
faders. You can choose one of several pre-loaded curves, or you can edit
the Position and Curve parameters to create your own custom fader curve.
1: CHANNEL ....... [1...8, ALL] Select the channel whose fader curve you
2: NUMBER (NUM:) .... [1...8] Select one of the preset fader curves.
3: POSITION ............. [0...127] Specify the position at which the fader
4: CURVE ................ [-64...+63] Specify the shape of the fader curve.
2. CROSS FADER
Here you can make fader curve settings for the cross fader. You can choose
from several preloaded curves, or you can edit the Position and Curve
parameters to create your own custom cross fader curves.
want to set. By selecting "ALL" you can
set all channels to the same fader curve.
value will be at maximum.