Midi Connections - Korg ZERO Manuel D'utilisation

12 ZERO 6R CH 6 R
ZERO 6R CH 6 R PRE EQ
13 ZERO 7L CH 7 L
ZERO 7L CH 7 L PRE EQ
14 ZERO 7R CH 7 R
ZERO 7R CH 7 R PRE EQ
15 ZERO 8L CH 8 L
ZERO 8L CH 8 L PRE EQ
16 ZERO 8R CH 8 R
ZERO 8R CH 8 R PRE EQ
17 ZERO INVALID AUDIO1 ---
--- ---
18 ZERO INVALID AUDIO2 ---
--- ---
Note: In some cases, audio input ports number 17 and number 18
on your computer may show a port name such as "ZERO
INV ALID AUDIO1, INVALID AUDIO2" or "INPUT17,
INPUT18." These audio input ports are invalid, and cannot
be used.
Note: Depending on the application you're using, the application
may display its own port name rather than obtaining the
name from the ZERO8.
*1: The output locations of the audio output ports can be changed
by using System Setup or the ZERO Edit application.

MIDI connections

In order to send and receive MIDI messages via the MIDI connectors, you
will need to obtain commercially-available MIDI cables. Connect these
cables between the ZERO8's MIDI connectors and the MIDI connectors of
your external MIDI device.
MIDI IN connector: This receives MIDI messages from another MIDI de-
vice. Connect it to the MIDI OUT connector of your external device.
MIDI OUT connector: This transmits MIDI messages from the ZERO8.
Connect it to the MIDI IN connector of your external device.
21