Firewire Audio Output Settings; Viewing The Eq Types; Adjusting The Lcd Display, And Initializing The Settings - Korg ZERO Manuel D'utilisation

FireWire audio output settings

4. I/O
Here you can specify how audio signals received by the ZERO8 will be
sent via FireWire. You can select the output sources that will be transmit-
ted via FireWire. The ZERO8 can handle up to 16-in and 16-out audio chan-
nels. For the sixteen FireWire audio outputs, you can specify eight stereo
channels as the output sources.
1: CH1...CH8 ........................... Select stereo channels 1–8 for the audio
sent from the FireWire connector.
2: SOURCE .............................. Select the source of the audio sent via
FireWire.
*PRE EQ: Selects the pre-EQ sound of the selected
mixer channel.
*PRE FDR: Selects the pre-fader sound of the selected
mixer channel.
*POST FDR: Selects the post-fader sound of the se-
lected mixer channel.
SEND1: Selects the sound of the EXT1 SEND bus.
SEND2: Selects the sound of the EXT2 SEND2
bus.
FX SEND: Selects the sound of the ZERO FX SEND
send bus.
RETURN1: Selects the sound of the EXT1 RETURN
bus.
RETURN2: Selects the sound of the EXT2 RETURN
bus.
FX RETURN: Selects the sound of the ZERO FX SEND
return.
BUS A: Selects the sound of crossfader channel A.
BUS B: Selects the sound of crossfader channel B.
MASTER: Selects the sound of master out.
TIP: Sources marked with an asterisk* will output the sound of the
INPUT (LINE) input if the FireWire audio input is selected
in INPUT SELECT.

Viewing the EQ types

5. EQ INFO
Here you can view a list of EQ types selected for each channel. The LCD
display will show the name of the EQ type selected for each channel.
Adjusting the LCD display, and initializing the
settings
6. SYSTEM
Here you can adjust the LCD display contrast, and calibrate the touch dis-
play. You can also restore the ZERO8 to its factory-set condition.
25