Firebrick And Baffle Installation - Napoleon HIGH COUNTRY NZ6000-1 Instructions D'installation Et D'opération

Masquer les pouces Voir aussi pour HIGH COUNTRY NZ6000-1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6.8

FIREBRICK AND BAFFLE INSTALLATION

OPERATION OF THE APPLIANCE WITHOUT THE BAFFLES CAN RESULT IN EXCESSIVE
TEMPERATURES THAT COULD DAMAGE THE APPLIANCE, CHIMNEY AND THE
The by-pass damper should be in the "OPEN" position when using the spark screen, during start-up, when
loading fuel and in warmer months where less heat is preferred.
The by-pass damper should be in the "CLOSED" position when the doors are closed and proper chimney
draw is established.
Place the by-pass damper
on the supports at the rear
and sides of the firebox.
BY-PASS IN "OPEN" POSITION
SURROUNDING ENCLOSURE.
Place the side and rear firebricks against the wall.
For easy start up open the by-pass damper.
SIDE VIEW
SIDE VIEW
BY-PASS IN "CLOSED" POSITION
29
EN
W415-1501 / 05.15.15

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Nz6000-1

Table des Matières