Keystone Installation; Door Handle Installation - Napoleon HIGH COUNTRY NZ6000-1 Instructions D'installation Et D'opération

26
6.3

KEYSTONE INSTALLATION

EN
A. Secure the faceplate to the appliance, using
the 12 screws supplied. Start all 12 screws,
then tighten evenly.
6.4

DOOR HANDLE INSTALLATION

RIGHT DOOR HANDLE (OPERATING)
- Insert the door rod through the round hole
of the latch ensuring the fl at edge of the "D"
shaped hole points towards the hinges.
- Slide the end of the door rod through the
bushing at the top of the door as shown.
- Insert the handle shaft through the door and
the latch.
- Secure with 2 fl at washers and a nut.
- Feed the handle through the handle spacer
and into the handle shaft.
LEFT DOOR HANDLE (FIXED)
- Insert the handle shaft through the door.
- Secure with a lock washer, 2 fl at washers and
a nut.
- Feed the handle through the handle spacer
and into the handle shaft.
See Note #2
Note #1:
You may need to move washers to the other side of
the latch to obtain suffi cient door seal.
Note #2:
The fi nal angle of the left door handle should mirror
the right door handle in the closed position. Tighten
the nut to secure the left handle at the desired angle.
W415-1501 / 05.15.15
Bushing
Door
Rod
Flat side of
"D" shape
Flat side of
"D" shape
Latch
Nut
Flat
Washers
Handle
Shaft
Handle
Flat side
Spacer
of "D"
shape
Handle
Handle shaft
Handle Spacer
Handle
Nut
Flat Washers
Lock
Washer