Fig - Hofmann EEWB746A Mode D'emploi

71
5-33
5-34
5-37
5-38
5-39
Operation
5.10.4 Start Optimisation
 Clamp the rim only on the balancer.
 Enter correct rim dimensions, or check existing
inputs for correctness.
 Starting from the main menu, press the menu
key F6 for the optimisation menu (Fig. 5-33).
The oPTiMiSATioN MENu "oP.1" screen (Fig. 5-34)
is displayed.

Fig. 5-34

oPTiMiSATioN "OP.1"
(Compensation run of rim only)
 Readjust the wheel such that the valve is exactly
perpendicular to and above the main shaft.
 Enter the valve position by pressing menu key
F1.
The oPTiMiSATioN 1 screen (Fig. 5-37)
displayed.
Fig. 5-37 oPTiMiSATioN "OP.2"
START is signalled on the screen.
 Press the START key.
A compensation run is performed.
The screen "OP.3" as shown in Fig. 5-38 is displayed.
Fig. 5-38 oPTiMiSATioN "OP.3"
 Mount the tyre correctly on the rim and inflate
to specified inflation pressure (make sure the
mounting guide rim of the tyre is correctly
seated).
 Confirm by pressing menu key F1.
The oPTiMiSATioN "oP.4" screen (Fig. 5-39) is
displayed.
Operator's Manual
is
EEWB746A