Hofmann EEWB746A Mode D'emploi page 109

109
Trouble shooting
Code C21
Display of programme version and model
number
Example: Programme version 1.22 for 5550 model
Press the OK key to display the number;

1.22 is displayed.
Press and hold the F3 key to display the model;

5550 appear.
Code C28
Select one of the 10 stored error codes and clear
the error memory
The last 10 different error codes are written to the error
memory so that they can be called up and reported
by the operator of the wheel balancer, e.g. for remote
diagnosis of malfunctions. The most recent error code
is written to memory location 1 and the previous error
codes are shifted to the higher memory locations.
Select one of the 10 malfunction code

messages.
Press the OK key to display the memory location

(left) and number of incidents (right), e.g. error
code on memory location 7 occurred 4 times.
Press the F6 key for the 2nd step.

Press the F3 key to see the values.

F4 = Clear error memory.
Operator's Manual
EEWB746A