Getting To Know Your Monitor - Angelcare AC027 Manuel De L'utilisateur

4- GETTING TO KNOW YOUR MONITOR

NURSERY UNIT
Power indicator
1
/ Low battery light indicator
Movement Sensor Pad indicator
2
Pause movement Sensor Pad
3
Allows you to pause the Sensor Pad if you remove baby
from the crib, e.g. for feeding or comforting. Ensure to
un-pause the Sensor Pad before putting baby in the crib
/ Pairing button
(press & hold)
Power ON/OFF
(press & hold)
4
Movement Sensor Pad sensitivity switch
5
To ensure adequate monitoring of your child's
movements, you can adjust the sensitivity of the
Sensor Pad (STEP 3, TEST THE SENSOR PAD)
Battery door (2 x AAA)
6
5- NURSERY UNIT ALERTS
NURSERY UNIT
Power ON/OFF & Low Battery Light Indicator
1
Flashing yellow: Nursery Unit battery is low.
• The Nursery Unit emits a single beep every
20 seconds.
Movement Sensor Pad
2
Flashing red: No movement is detected.
• The Nursery Unit speakers will emit loud
consecutive beeps - this is the Movement Alarm.
Flashing white: Monitor is paused.
Flashing light blue: Loss of connectivity between
the Nursery Unit and the Sensor Pad.
• The Nursery Unit emits a single beep every 20 seconds.
Flashing yellow: Sensor Pad battery is low.
• The Nursery Unit emits a single beep every
20 seconds.
Note:
Press Pause on the Nursery Unit to stop the alarm.
1
2
3
4
1
6
5
2
7
E
N