Step 3 - Turning On Your Monitor; Step 4 - Testing And Getting To Know Your Monitor - Angelcare AC1320 Manuel Du Propriétaire

IMPORTANT
Install the Nursery Unit on a flat, stable surface facing the crib at a distance of at least 1
meter. Make sure to plug the adapter to the socket outlet nearest to the equipment and
that is easily accessible.

STEP 3 - TURNING ON YOUR MONITOR

1 2
3
When Parent Unit is turned ON and
Nursery Unit is OFF, Parent Unit will
display Disconnected mode.
INDICATION BAR IMPORTANT ICONS
Temperature icon: Indicates room temperature.
Temperature Alarm icon: Indicates Temperature Alarm is active.
Nursery Unit Icon: Indicates the Nursery Unit connected to the Parent Unit.
Night View Mode icon: Night View Mode.
Sound icon: Indicates that Sound function is active.
Connection icon: Indicates the connection quality between the Parent Unit and the Nursery Unit.
Good connection
Battery Level icon: Indicates battery level
Empty

STEP 4 - TESTING AND GETTING TO KNOW YOUR MONITOR

IMPORTANT
When in menu or sub-menu modes, sound transmission between Parent and Nursery Units will be
temporarily deactivated.
01mf6_Manuel_AC1320_INT_12320.indd 7
All manuals and user guides at all-guides.com
1) Press and hold the Parent Unit ON/OFF
button for 2 seconds until LCD screen
is turned ON. Angelcare's logo will be
shown for 1 second.
2) Push and hold the Nursery Unit Power
ON/OFF button for 2 seconds.
3) The Parent Unit will display Video mode
screen.
If there is a lost connection between the 2 units
after 15 seconds, the Out-of-Range alarm will sound
on the Parent Unit (refer to troubleshooting):
• The Out-of-Range icon will appear
• The Lost Connection icon will appear on
Poor connection
1/3 Full 2/3 Full
The Angelcare monitor can be used with the pre-program factory settings
®
or you can also customize your settings to your preference. Main menu on the
LCD display shows the different operation settings. Use the direction keys to
set or check the different functions on the Parent Unit.
Press the Menu/Select button to select an icon. The icon will change from
green to blue to show that the icon is selected. Press VIDEO ON/OFF button
to exit or to go back to main menu when in sub-menu.
on the screen.
the indicator bar.
Lost connection
Full
E
N
Out-of-Range
7
2016-02-17 3:06 PM