Güde GKS 1100 P Mode D'emploi page 49

Disc replacement
Attention! Always switch the machine off and pull the plug out before any maintenance,
adjustment and change of the circular saw blade.
Fig. 6
Fig. 7
1.)
Turn the saw head to the machine table and detent it with
the locking button (B).
2.)
Shift the mobile cover of the circular saw blade slightly
backwards, apply the wrench for circular saw blade change
and detent/block the circular saw blade shaft with the detent
lever. (I)
Now drive the circular saw blade screw fully out. (I)
(Left-hand thread!)
3.)
Remove the circular saw blade with protective gloves and
proceed in the opposite order at assembly.
(Please keep these Instructions for future reference)
49
49