Transport And Disposal; Preparation For Transport, Protection Against Freezing And Measures For Longer Periods Of Non-Use - Melitta SOLO Mode D'emploi

0 Transport and disposal

Preparation for transport, protection against freezing and mea­
sures for longer periods of non­use
Allowing liquids in the appliance to evaporate
We recommend that you dry out the appliance if it will not be used for an extended
period of time. this protects the appliance from damage due to freezing.
Prerequisite: The appliance is ready for operation.
•
take the Melitta claris
• simultaneously press the button for single-cup dispensing
On / Off button
→ the standby symbol
quently, the symbol for the water reservoir
• Flip up the lid of the water reservoir (Fig. A, no. ) and pull the water
reservoir up and out of the appliance.
•
Press the button for brewing strength
→
the device will be dried out automatically in the interior. subsequently the
device switches off automatically.
•
Reinsert the empty water reservoir.
Note
the Melitta claris
of time. consequently we recommend storing the Melitta claris
filter in a glass of water in the refrigerator if the device will not be used for
a longer period of time.

Heft_Solo_EU.indd 66
water filter out of the water reservoir.
®
for more than 2 seconds.
is illuminated after a brief heat-up phase. subse-
water filter should not remain dry over a longer period
®
and the
will be illuminated.
.
®
water
09.07.2009 15:47:45