Melitta SOLO Mode D'emploi page 65

Warning!
The decalcifying agent can cause skin irritations.
Comply with the safety instructions and the quantity information specified
on the decalcifying agent packaging.
6 Press the button for brewing strength
program.
→
The integrated decalcifying program will start. Water flows inside the appli-
ance into the drip tray in multiple intervals. this process lasts approximately
15 minutes. subsequently, the symbol for the drip tray
7 empty the drip tray and then reinsert it.
→
the symbol for the water reservoir
8 Rinse out the water reservoir and fill it with tap water to the Max. marking.
9 Press the button for brewing strength
decalcifying program.
→
Water flows out of the outlet as well as in the interior of the appliance into
the drip tray. this process lasts approximately 5 minutes. subsequently, the
symbol for the drip tray
10 empty the drip tray and then reinsert it.
→
the standby symbol
the appliance is ready for operation.
11 Reinsert the Melitta claris
Heft_Solo_EU.indd 65
to start the integrated cleaning
is illuminated.
, to continue with the integrated
will be illuminated.
is illuminated after a brief heat-up phase.
water filter into the appliance.
®
will be illuminated.

09.07.2009 15:47:44