Routine Cleaning And Maintenance - Tecno-gaz Sterilair Pro SA210ZSA Manuel De L'utilisateur

ENGLISH

ROUTINE CLEANING AND MAINTENANCE

In order to maintain the performance and efficiency of the lamp germicide, it is
important to strictly comply with the maintenance program attached to the device.
Do not use water jets or sprays for cleaning,
Use a brush to remove dust build-up on the air inlet and outlet vent at least every month.
Use a soft moist cloth to remove dust build-up from the structure.
BEFORE EVERY INTERNAL MAINTENANCE OPERATION UNPLUG THE DEVICE!
Every 3 months (approximately 2,000 hours) replace the filter inside the air
inlet vent (Spare filter: Art. SSAA015).
Follow these instructions step-by-step to replace the filter:
1. Take the supplied L-shaped key ( 3MECL0001) specific for
TORX safety screws (Fg.6) and unscrew the front part;
2. Remove the front of the vent where the filter is housed.
(Fg.7)
3. Replace the filter (SSAA015).
4. Put the front of the vent back on in the order shown in Fg.7.
FILTRO: SSAA015
16
Fg.6
Descrizione / Descripion: Materiale / Material:
CHIAVE PER VITI TORX ANTICORODAL
Disegnatore / Drawn by:
Destinazione / Destination:
L.L.
Data / Date:
EN 22768-1; EN 22768-2
Tolleranz e generali in ac c ordo c on la norma:
m - Media
C las s e di tolleranz a lineare angolare: ; C las s e di tolleranz a geometric a:
EN 22768-1; EN 22768-2
General toleranc es ac c ording w ith the norm:
m - Medium
D imens ional tolleranc e c las s : ; Geometric altolleranc e c las s :
Q.tà:
Q.ty:
Tel 0521 838011
Fax 0521 833391
tp@tecnogaz.com
I disegni, modelli ecc sono di proprietà Tecno-gaz e non possono essere copiati, riprodotti o mostrati a terzi senza l'autorizz
The drawings, models etc are Tecno-gaz property and cannot be co pied, reproduced or skown to third without written authorizat
Fg.7
16/09/2011
(s enz a indic az ione c o
K;
(unles s otherw is e s ta
K;
Rugosità: Scala /
Surface condition:
1:
A
a