Maintenance; Cleaning; Tank Cleaning; Tank Filter Cleaning - Tecno-gaz Multisteril Fast Mode D'emploi

ENGLISH
9
9.1

Cleaning

The cleaning shall be carried out after the cooling of the device and the unplugging
of the power cord.
Use non aggressive detergents suitable for plastics
Use detergents suitable for s/s steel
9.2

Tank cleaning

Check the cleaning of the tank at the end of each cycle
Remove deposits or debris to avoid injection of materials into the drain circuit and cause
obstruction.
9.3

Tank filter cleaning

Check the cleaning of the tank filter at the end of each cycle
18

MAINTENANCE

Lift the device lid;
Remove residues from the tank.
Extract the metal filter in the tank and pull it
upward, as shown in the picture;
Wash the filter under tap water to remove
impurities.
Re-place the filter in its position: the filter open
side has to be inside the drain coupler while the
close one has to be seen from inside the tank.