Technical Data - Roller King 1 1/4 Notice D'utilisation

eng
Read the operating manual before starting
Electrical device complies with protection class II

1. Technical data

Use for the intended purpose
WARNING
ROLLER'S King 1¼, and ROLLER'S King 2 electric die stocks and ROLLER'S Central and ROLLER'S Rola Automatik quick-change die heads for cutting pipe threads for
right and left hand threads, bolt threads for right hand thread, for roll grooving.
All other uses are not for the intended purpose and are therefore prohibited.
1.1. Scope of Supply
ROLLER'S King 1¼ Set C:
ROLLER'S King 1¼ Set A / C:
ROLLER'S King 1¼ Set M 20-25-32-40 (M × 1,5):
ROLLER'S King 2 Set C R ½" – 1¼":
ROLLER'S King 2 Set C R ½" – 2":
ROLLER'S King 2 Set A / C:
ROLLER'S King 2 Set M 20-25-32-40-50 (M × 1,5):
1.2. Article numbers
Drive unit
Adapter for die heads up to 1¼" / 40 mm
ROLLER'S quick-change die heads
ROLLER'S dies
Support device – counter holder
ROLLER'S dual purpose holder
Steel cases
Thread-cutting materials
ROLLER'S Nipparo
1.3. Working range of the quick-change die heads
Thread-Ø
ROLLER'S Central
ROLLER'S Rola Automatik (Fig. 5)
Thread types
Thread length
Produce nipple
1.4. Speeds of the die head holder (2)
Continuous speed control
1.5. Electrical data
Consumed power
Rated current consumption
Fuse (mains)
Cut-out mode
Consumed power
Rated current consumption
Fuse (mains)
Cut-out mode
Protective insulation according to VDE 0740 double insulated or CEE publications 20. The rated current consumption can rise briefl y up to 50% without infl uencing
the function of the unit. The ROLLER'S King 1¼ and ROLLER'S King 2 electric die stocks are equipped with overload protection. The motor is switched off in case of
constant overloading. Press the overload protection (green button) (10) on the motor handle (11) after a short rest period. See also page 5. Faults.
1.6. Dimensions
Unit
Counter holder
1.7. Weight
Unit
Counter holder
1.8. Noise information
Workplace-related emission value
1.9. Vibrations
Weighted rms value of acceleration
Drive unit, counter holder, quick-change die heads ROLLER'S Central R ½", ¾", 1", 1¼",
steel case, instruction manual.
Drive unit, counter holder, quick-change die heads ROLLER'S Rola Automatik R ½", ¾",
ROLLER'S Central 1", 1¼", steel case, instruction manual.
Drive unit, counter holder, quick-change die heads ROLLER'S Central M 20, M 25, M 32,
M 40 (M × 1,5), steel case, instruction manual.
Drive unit, counter holder, adapter for die heads up to 1¼", quick-change die heads
ROLLER'S Central R ½", ¾", 1", 1¼", steel case, instruction manual.
Drive unit, counter holder, adapter for die heads up to 1¼", quick-change die heads
ROLLER'S Central R ½", ¾", 1", 1¼", 1½", 2", steel case, instruction manual.
Drive unit, counter holder, adapter for die heads up to 1¼", quick-change die heads
ROLLER'S Rola Automatik ½", ¾", 1", ROLLER'S Central R 1¼", 1½", 2", steel case, instruction manual.
Drive unit, counter holder, adapter for die heads up to 1¼" / 40 mm, quick-change die heads
ROLLER'S Central M 20, M 25, M 32, M 40, M 50 (M × 1,5), steel case, instruction manual.
ROLLER'S King 1¼ ROLLER'S King 2
847309 850309
479821
see ROLLER catalogue see ROLLER catalogue
see ROLLER catalogue see ROLLER catalogue
847310 850310
543100 543100
847800 850800
see ROLLER catalogue see ROLLER catalogue
see ROLLER catalogue see ROLLER catalogue
⅛ –1¼", 16 – 40 mm R ⅛ – 2", 16 – 50 mm
R ⅜ –1¼" R ⅜ – 2"
Pipe thread ISO 7-1 (DIN 2999) conical 1:16 (BSPT), right and left hand thread.
Pipe thread NPT conical 1:16, right hand thread
Other thread types on request (M × 1,5 (IEC))
Standard thread length. ROLLER'S Rola Automatik quick-change die heads open automatically at the
prescribed standard thread length.
With ROLLER'S Nipparo R ⅜ –1¼" or ⅜ – 2" nipple clamp for right and left hand thread (Fig. 3).
ROLLER'S King 1¼ ROLLER'S King 2
35 – 27 rpm 30 – 20 rpm
230 V~, 50 – 60 Hz 230 V~, 50 – 60 Hz
1,200 W 1,200 W
6 A 6 A
10 A (B) 10 A (B)
S3 20% 2/10 min S3 20% 2/10 min
110 V~, 50 – 60 Hz 110 V~, 50 – 60 Hz
1,200 W 1,200 W
12 A 12 A
20 A 20 A
S3 20% 2/10 min S3 20% 2/10 min
ROLLER'S King 1¼ ROLLER'S King 2
480×75×165 mm 492×78×196 mm
260×70×150 mm 415×105×175 mm
4.50 kg 5.70 kg
1.10 kg 2.35 kg
83 dB (A) 83 dB (A)
2.5 m/s² 2.5 m/s²
Environmental friendly disposal
CE conformity mark
eng
9