Chain Lubricant; Filling Chain Oil Tank - Stihl MSE 220 Notice D'emploi

English

Chain Lubricant

For automatic and reliable lubrication of
the chain and guide bar – use only an
environmentally compatible quality
chain and bar lubricant. Rapidly
biodegradable STIHL Bioplus is
recommended.
Biological chain oil must be resistant to
aging (e.g. STIHL Bioplus) since it will
otherwise quickly turn to resin. This
results in hard deposits that are difficult
to remove, especially in the area of the
chain drive, clutch and chain. It may
even cause the oil pump to seize.
The service life of the chain and guide
bar depends on the quality of the
lubricant. It is therefore essential to use
only a specially formulated chain
lubricant.
Do not use waste oil. Renewed contact
with waste oil can cause skin cancer.
Moreover, waste oil is environmentally
harmful.
Waste oil does not have the necessary
lubricating properties and is unsuitable
for chain lubrication.
16
All manuals and user guides at all-guides.com

Filling Chain Oil Tank

Preparations
Thoroughly clean the oil filler cap (1)
N
and the area around it to ensure that
no dirt falls into the tank.
Position the machine so that the
N
filler cap is facing up.
Open the filler cap.
N
Filling chain oil tank
Filling chain oil tank
N
Take care not to spill chain oil while
refilling and do not overfill the tank.
Close the filler cap.
N
Check the oil level regularly during
N
operation.
Top up the oil tank when the oil level
N
reaches the "min" mark (2) or
earlier.
If the oil level in the tank does not go
down, the reason may be a fault in the oil
supply system: Check chain lubrication,
clean the oilways, contact your dealer
for assistance if necessary STIHL
recommends that you have servicing
and repair work carried out exclusively
by an authorized STIHL servicing
dealer.
MSE 220