Solo 155 Instructions D'emploi page 22

Dear Customer,
Congratulations for choosing this SOLO quality
product.
The proven technology used in the Nikasil-coated,
vertical cylinder 2 cycle engine guarantees high
performance and low fuel consumption.
The easy-start Primer system assures quick,
reliable start-up. The easily accessible air filter, allow
for easy servicing and low fatigue operation. Prior to
operating the unit, please read the owner's manual
carefully, and most importantly, observe all safety
rules.
In order to maintain the performance of the
brushcutter, it is necessary to carefully follow the
service instructions.
Your dealer will be glad to assist you with any
questions.
CE Declaration of conformity
In accordance with EG Directives 98/37/EC,
2000/14/EC and 89/336/EEC (amended by
92/31/EEC), SOLO Kleinmotoren GmbH, Stuttgarter
Strasse 41, D-71069 Sindelfingen, being solely
responsible, states that the product referred to in this
declaration complies with the requirements of the
Machinery Directive.
Description of product:
Model/type description:
Sound power level (EN ISO 3744; EN ISO 22868)
Guaranteed sound
Actual sound
Applied standards:
EN ISO 12100; EN 11806; ISO 14865;
EN ISO 14982, DIN ISO 22867
Conformity assessment procedures
(98/37/EG)
(2000/14/EG)
This declaration of conformity loses its validity, if the
equipment is converted or modified without the
manufacturer's consent.
Sindelfingen,
st
1 January 2006
SOLO Kleinmotoren GmbH
ENGLISH 2
Preface
Brushcutter
155
115 dB(A)
114 dB(A)
! Appendix V
! Appendix V
Wolfgang Emmerich
Executive Director
Symbols
The following symbols are used in this manual and on
the product:
Thoroughly read these operating
instructions before undertaking any
maintenance, installation and cleaning
steps
Wear ear defenders and a face shield
before starting the engine
Wear protective gloves when handling
and working with the equipment
Wear solid shoes, preferably safety shoes
with a good tread
Always handle this power tool with
particular care
Maintain a minimum distance of
15 metres bystanders
Please note: objects may be thrown out
and high
Please note: power tool may kick back on
contact with a solid object
Never use serrated cutters; generally use
only cutters approved for the equipment
type
Never exceed the specified
maximum speed
Never smoke near the power tool or
where the equipment is refuelled!
Keep open flames away from the power
tool and the fuel can
- This equipment produces exhaust
fumes
and
- fuel vapours are poisonous;
never start or refuel in enclosed spaces
Choke open
Warm start and operating setting
Choke closed
Cold start setting
Packaging
The packing materials used to protect the unit against
damage during transportation are cartons made from
pulp, which can be re-used or recycled.