Sound Pressure Level; Sound Power Level; Original Spare Parts - Sabo 52-S A Livret D'entretien

Length
Width
Height
Wheels front/rear
Bearings front
Bearings rear

Sound pressure level

52-S A
Emission sound pressure level at operator's workplace;
measured according to EN ISO 5395-2
Measuring inaccuracy; according to ISO 4871
52-PRO S A
Emission sound pressure level at operator's workplace;
measured according to EN ISO 5395-2
Measuring inaccuracy; according to ISO 4871
Vibrations
52-S A
Vibrations on the lawnmower's handlebar;
measured according to EN ISO 5395-2
Measuring inaccuracy; according EN 12096
52-PRO S A
Vibrations on the lawnmower's handlebar;
measured according to EN ISO 5395-2
Measuring inaccuracy; according EN 12096
All models

Sound power level

Guaranteed sound power level;
measured according to 2000/14/EC

20 ORIGINAL SPARE PARTS

52-S A
Roller bearing grease
Spark plug To be ordered from B&S using the number 692720
Air filter insert To be ordered from B&S using the number 795066
Pre-filter To be ordered from B&S using the number 796254
Conversion kit for mulching system
Cutter bar
52-PRO S A
Roller bearing grease
Spark plug
Air filter insert
Pre-filter
Conversion kit for mulching system
Cutter bar
46 kg 52-PRO S A
1580 mm
755 mm
1100 mm
Ø 210 mm / Ø 210 mm
Grooved ball bearing
Bronze sliding bearing
L = 83 dB(A)
pA
L = 82 dB(A)
pA
a = 3.5 m/s
hW
1.8 m/s
a = 2.5 m/s
hW
1.3 m/s
L = 96 dB(A)
wa
SAA11300
BSA634, BSA642
For safety reasons, the cutter bar must
always be replaced by an authorised
workshop.
This workshop has the respective spare part
numbers for the cutter bar available.
SAA11300
M78543
MIU12718
MIU12719
BSA633, BSA641
For safety reasons, the cutter bar must
always be replaced by an authorised
workshop.
This workshop has the respective spare
part numbers for the cutter bar available.
1.5 dB
1.5 dB
2
2
2
2
12