Brief Instructions; Explanation Of The Buttons - Kettler UM 678 Serie Mode D'emploi Et Instructions D'entraînement

Training and Operating Instructions Trainings- und Bedienungsanleitung
Kjoule > Kcal > Kjoule
16
GB

Brief Instructions

Area of Operation
The 5 buttons are briefly explained below.
All Buttons
• Display wakes up from standby mode
RECOVERY
(recovery pulse with fitness mark)
With this function button, in the case of active pulse measure-
ment, the recovery pulse function is started and a fitness
mark determined.
RESET
(press briefly) before the training
With this function button, the current display is cleared.
RESET
(press for longer)
• Clear the display for a restart.
Encoder
(turn right)
• In the case of selection: jumps one menu item further
• In the case of inputs: increases the input
Encoder
(turn left)
• In the case of selection: jumps one menu item further
• In the case of inputs: reduces the input
Encoder
(press briefly)
• The selection or input is adopted.
The next menu item is called up.
Encoder
(press for longer)
• The training selection of the current person is displayed
again.
or
• The display is cleared with subsequent program or person
selection.
RESET + Encoder
(at the same time)
• Conversion of the energy consumption from Kilojoules to Kilo-
calories
START STOP
• Start of training. The training time counts upwards.
• Training stop with STOP display. The training time is paused.
The average Ø of the brake stages is briefly displayed.
QUICK START
• "MANUAL" program is started. The training time counts
upwards.
Pulse Measurement
Your pulse can be measured using 3 sources:
1. Ear clip
2. Hand pulse sensors
3. Chest strap