Questions/Answers - Cuisinart BFP603E Instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
H. Questions/Answers
QUE FAIRE SI:
My appliance doesn't work?
The motor does not start?
the motor slows?
the food processor shuts off when running?
the blade won't move?
the blade won't move in spite of reducing the amount of
food in the bowl?
the food is unevenly chopped or mixed?
the slices are unequal or uneven?
some food remains on top of the disc?
34
REPONSES :
Make sure the appliance is plugged in.
A safety locking system prevents the motor from
starting if the appliance is not correctly assembled.
Make sure the bowl and the lid are properly installed.
If the motor still does not start, check the power cord
and the socket.
The amount of food exceeds the recommended
maximum. Remove some of the food and proceed in
two batches.
The lid may be unlocked. Make sure that it is properly
locked in place.
A safety system prevents the machine from
overheating when overloaded. Press the ON/OFF
button and unplug the machine from the mains. Wait
10 to 15 minutes to allow the processor to cool then
plug it in again.
Remove some of the food.
Cut larger pieces of food into smaller pieces before
chopping and use the PULSE function for better
results.
Turn the appliance off and unplug it. The blade
was probably not properly positioned. Check the
assembly of the processor.
The ingredients must be cut into even pieces (about
3cm) before being processed.
Process in batches to avoid overloading the
appliance.
Cut food into even pieces and place in the feed tube.
Press the pusher down evenly.
It is normal for smaller pieces of food to remain on
top of the disc. Cut the ingredients by hand to add to
the processed ingredients.

Publicité

Table des Matières
loading

Table des Matières