Maintenance And Cleaning - Renkforce 1000562 Notice D'emploi

The recording is only black/white
• Due to the principle, the recording at night with the IR-LEDs activated will always be
black/white and never in colour.
The buttons on the digital recorder or the IR remote control have no function
• While a recording is running, many functions will not work (e.g. calling the OSD menu).
Frist stop the recording (push button „REC/STOP").

13. Maintenance and Cleaning

The product is maintenance-free for you. Servicing or repair must only be carried out
by a specialist or specialist workshop. There are no components on the inside of the
product that need maintenance by you; this is why you should never open/disassemble
it (except for battery change in the IR remote control).
A dry, soft and clean cloth is sufficient for cleaning the outside.
Remove dust on the digital recorder with a long-haired, soft and clean brush and a
vacuum cleaner.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical
solutions, since these may damage the casing or even impair function.
83