Renkforce 1000562 Notice D'emploi page 78

• Briefly push the button „
show the recording starting time (hours/minutes/seconds) and the channel number
(CH1 or CH2).
The type of recording is also appended to the file name:
„MAN" = manual recording
„MOT" = recording was triggered by motion detection
„APP" = automatic recording
Example: 214240_CH1_MOT.AVI -> recording started at 21:42:40 hours, on channel 1,
this is a motion-detection-triggered recording (e.g. a person in the monitoring area.
• Use the buttons „2" and „8" to choose the recording to be played back (it is marked
in colour).
To delete the selected recording (or to delete all recordings of the respective
date/subdirectory), keep the button „
Then a window „Delete All/Current, Cancel" is displayed.
Use the buttons „2" and „8" to choose between:
„Delete All":
„Delete Current": Only delete the currently selected recording
„Cancel":
Confirm the selection with „
chosen, a safety prompt will appear („Yes" = delete, „No" = cancel). Select
your answer as usual with the buttons „2" and „8" and confirm with
„ ".
Attention!
Deleted data cannot be recovered!
• Briefly push the button „
• Pushing „4" or „6" repeatedly permits switching between rewind and fast forward.
2-, 4-, 8- and 20-fold speed is possible.
78
". Then all present recordings appear. The file name will
Delete all recordings
Cancel
". If „Delete All" or „Delete Current" were
" to start or pause playback.
" pushed for about one second.