Submenu „System Setting; Function „Video Output; Function „Date Time - Renkforce 1000562 Notice D'emploi

c) Submenu „System Setting"
In the OSD menu, use the buttons „4" and „6" to select the submenu „System Setting"
and push the button „
Function „Video Output"
The video standard of the AV output can be switched between PAL and NTSC. In Europe,
usually use „PAL".
Proceed as follows:
• Use the buttons „2" and „8" to pick the function „Video Output" and then push the
button „ ".
• Use the buttons „2" and „8" to choose between „PAL" or „NTSC".
• Confirm the selection with the button „
• Push the button „MENU/ESC" on the digital recorder or the button „MENU" or „ESC"
on the IR remote control repeatedly to return to the respective previous menu or leave
the OSD menu.
Function „Date Time"
Set the current date and time here. This is not only needed for the file name (when
saving the video or photograph), but also for the display in the video/photograph (if it is
activated; see chapter 11 d), function „Time Stamp").
Proceed as follows:
• Use the buttons „2" and „8" to pick the function „Date Time Setup" and then push
„ ".
• Use the buttons „4" and „6" to switch between year, month, day, hours and minu-
tes.
The respective active input item is highlighted in colour. Change the value via the
buttons „2" and „8".
• Confirm the setting with „
• Push the button „MENU/ESC" on the digital recorder or the button „MENU" or „ESC"
on the IR remote control repeatedly to return to the respective previous menu or leave
the OSD menu.
".
".
".
65